Course at a glance
Release date | 5/15/2018 | |
Level | ||
Runtime | 14h 45m | |
Closed captioning | N/A | |
Transcript | N/A | |
eBooks / courseware | N/A | |
Hands-on labs | N/A | |
Sample code | N/A | |
Exams | Included |
Course description
The Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 2 (ICND2) course. This exam tests a candidate's knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network. The exam covers topics on extending switched networks with VLANs; VLSM and IPv6 addressing; the VTP, RSTP, OSPF and EIGRP protocols; determining IP routes; configuring, verifying and troubleshooting VLANs; managing IP traffic with access lists; NAT and DHCP; establishing point-to-point connections and establishing Frame Relay connections.
Meet the expert
As a certified Microsoft Instructor, Ken has focused his career on various security aspects of computer and network technology since the early 1980s. He has offered a wide variety of IT training and high level consulting projects for Fortune 500 companies globally. Through the course of his extensive career, he has taught a full line of Microsoft, CompTIA, Cisco, and other high level IT Security curricula.
Course outline
Redundant Switched Topologies
Troubleshoot VLAN Connectivity (24:45)
- Introduction (00:11)
- Overview of VLANs (01:52)
- How to create a VLAN (04:05)
- How to create a VLAN Continued (01:32)
- What Is a Trunk (02:08)
- How to Configure a Trunk (02:02)
- How to Configure a Trunk Continued (01:53)
- DTP (02:30)
- VLAN Troubleshooting (02:49)
- Destination MAC Addresses and VLANs (00:40)
- VLAN Troubleshooting Continued (00:36)
- Troubleshooting Trunks (02:14)
- Troubleshooting Trunks Continued (00:58)
- Summary (01:01)
- Summary (00:08)
Building Redundant Switched Topologies (40:06)
- Introduction (00:17)
- Problems with Redundant Topologies (04:11)
- How Spanning-Tree Works (04:26)
- How Spanning-Tree Works Continued (07:21)
- STP Problems (04:59)
- PVST+ (01:23)
- PVST+ Continued (01:46)
- Changing the Bridge ID (03:13)
- Reviewing the STP Topology (01:23)
- Reviewing the STP Topology Continued (02:57)
- What if STP Fails Continued (00:00)
- What if STP Fails? (01:54)
- PortFast and BPDU Guard (03:19)
- PortFast and BPDU Guard Continued (01:25)
- Summary (01:18)
- Summary (00:08)
Improve Redundant Switched Topologies (17:10)
- Introduction (00:10)
- What Is EtherChannel (01:50)
- EtherChannel Protocols (02:52)
- EtherChannel Protocols Continued (01:11)
- PAgP (01:28)
- LACP (01:08)
- How to Configue EtherChannel (01:19)
- How to Configure EtherChannel Continued (02:51)
- Verify EtherChannel (00:44)
- Verify EtherChannel Continued (02:02)
- Summary (01:22)
- Summary (00:08)
Layer 3 Redundancy
Spanning Tree and Trunking Demo (45:04)
- Introduction (00:09)
- Demo: Spanning Tree (04:16)
- Demo: show span (05:04)
- Demo: Influencing Traffic (06:14)
- Demo: Portfast (04:01)
- Demo: EtherChannel (06:12)
- Demo: Add Port Channels (05:21)
- Layer 3 Redundancy (00:08)
- Demo: Trunking (05:21)
- Demo: VTP (03:01)
- Demo: VTP Continued (05:04)
- Summary (00:08)
Understanding Layer 3 Redundancy (50:12)
- Introduction (00:08)
- Why Have Default Gateway Redundancy (01:47)
- Default Gateway Redundancy (01:35)
- Default Gateway Redundancy Continued (01:19)
- FHRP (02:46)
- HSRP (02:38)
- HSRP Continued (04:11)
- HSRP Failover (03:21)
- HSRP Configuration (01:32)
- The HSRP Protocol (01:28)
- Show Standby (02:03)
- Active and Standby Routers (02:07)
- HSRP Track Interface (01:33)
- HSRP Load Balancing (01:28)
- Gateway Load Balancing Protocol (03:40)
- QoS (04:22)
- QoS Continued (02:32)
- QoS Configuration (01:46)
- QoS Options (02:17)
- Marking (02:18)
- Queuing Methods (02:25)
- Congestion Avoidance (00:55)
- Summary (01:42)
- Summary (00:08)
Troubleshooting Connectivity
Troubleshoot IPv4 Connectivity (42:36)
- Introduction (01:07)
- Troubleshooting End-to-End (00:44)
- Troubleshooting End-to-End Continued (01:08)
- Verify End-to-End Connectivity (00:17)
- Verify End-to-End Connectivity Continued (02:06)
- Ping (02:49)
- Traceroute (03:51)
- Ping and Traceroute on Switches (01:59)
- Telnet (01:28)
- PC Host-Based ARP (01:10)
- Show MAC Address Table (00:55)
- End-to-End Connectivity (00:33)
- Path Verification (03:45)
- Speed Mismatch (02:27)
- Using Show Interface (01:33)
- What Is the Current Desired Path (01:20)
- Codes to Know (01:59)
- Default Gateway Problems (00:51)
- Default Gateway Problems Continued (03:09)
- DNS Issues (00:33)
- DNS Issues Continued (01:37)
- Resolution Mapping with Ping (01:09)
- ACL Issues (01:04)
- ACL Issues Continued (02:03)
- Correct the ACL (01:06)
- Permitting Telnet (01:31)
- Summary (00:08)
Troubleshoot IPv6 Connectivity (20:08)
- Introduction (00:18)
- IPv6 Address Types (02:11)
- Private Addresses (01:43)
- IPv6 Address Types Continued (03:12)
- How to Troubleshoot IPv6 Connectivity (00:48)
- Physical Connectivity (00:26)
- Verify End-to-End Connectivity (00:41)
- Verify End-to-End Connectivity Continued (00:14)
- Using Telnet (01:11)
- Show Neighbor (01:46)
- Show IPv6 Neighbors (00:18)
- Identifying the Path (01:10)
- Default Gatway Problems (01:07)
- DNS Problems (00:38)
- DNS Problems Continued (00:36)
- ACL Problems (01:00)
- ACL Problems Continued (00:54)
- Summary (01:39)
- Summary (00:08)
EIGRP
Implmenting EIGRP (34:35)
- Introduction (00:10)
- Routing by Rumor (06:39)
- Administrative Distance (02:34)
- EIGRP Features (03:22)
- EIGRP Path Selection (04:23)
- EIGRP Path Selection Continued (03:29)
- The EIGRP Metric (03:29)
- The EIGRP Metric Continued (00:55)
- Configuring EIGRP (01:38)
- Verify Neighbors (02:33)
- Verify EIGRP (00:44)
- Verify EIGRP Continued (01:52)
- EIGRP Load Balancing (01:42)
- Summary (00:49)
- Summary (00:08)
Implmenting EIGRP for IPv6 (35:01)
- Introduction (00:17)
- Demo: Troubleshooting EIGRP (06:38)
- Demo: OSPF (04:30)
- EIGRP for IPv6 (00:16)
- Demo: EIGRP for IPv6 (06:01)
- Demo: EIGRP Routes (02:50)
- Demo: Headquarters and Peers (05:03)
- Supporting Multiple Protocols (02:07)
- EIGRP Commands for Configuration (02:06)
- EIGRP Commands for Configuration Continued (02:09)
- Verify Interface and Neighbors (00:47)
- Verify the Toplogy Table (01:30)
- Summary (00:32)
- Summary (00:08)
Troubleshooting EIGRP (13:44)
- Introduction (00:12)
- EIGRP Troubleshooting Components (01:36)
- Troubleshooting EIGRP Neighbors (00:56)
- Troubleshooting EIGRP Neighbors Continued (00:44)
- EIGRP AS Mismatch (01:35)
- Serial Interfaces on the Link (01:47)
- Passive Interfaces (00:48)
- EIGRP Routing Table Troubleshooting (00:38)
- EIGRP Routing Table Troubleshooting Continued (03:44)
- Summary (01:31)
- Summary (00:08)
OSPF
OSPF Overview (33:01)
- Introduction (00:12)
- OSPF (00:46)
- Data Stored in a Link-State Protocol (03:11)
- Metric (03:06)
- OSPF Adjacencies (02:27)
- Establishing OSPF Neighbor Adjacencies (02:15)
- Building the Link-State Database (03:25)
- What Are OSPF Areas (06:18)
- OSPF Router Types (01:51)
- LSAs (01:44)
- Basic LSA Types (06:16)
- Summary (01:17)
- Summary (00:08)
Multiarea OSPF Implementation (12:52)
- Introduction (00:06)
- Multiarea OSPF Planning (02:31)
- Multiarea OSPF Configuration Continued (03:46)
- Multiarea OSPF Configuration Continued (01:25)
- Verify Multiarea OSPF (02:08)
- Verify Multiarea OSPF Continued (02:01)
- Summary (00:44)
- Summary (00:08)
Troubleshooting Multiearea OSPF (20:36)
- Introduction (00:08)
- OSPF Neighbor States (01:49)
- OSPF Neighbor States Continued (02:28)
- Troubleshooting OSPF (05:03)
- OSPF Neighbor Problems (01:38)
- OSPF Neighbor Problems Continued (02:08)
- OSPG Area (01:01)
- Enabling Interfaces for OSPF (00:44)
- Passive State (01:03)
- HQ Advertisement (01:10)
- Other Routing Protocols (02:24)
- Summary (00:47)
- Summary (00:08)
OSPF Demo (50:02)
- Introduction (00:21)
- Demo: Finding a Route (04:59)
- Demo: Advertising the Interface (03:22)
- Demo: Optimal Route (03:45)
- Demo: Adjacencies (04:58)
- Demo: IPv6 Network Addresses (03:41)
- Demo: IPv6 Network Addresses Continued (06:02)
- Demo: IPv6 Gateways and OSPF (04:53)
- Demo: IPv6 OSPF Continued (06:02)
- Demo: OSPF Neighbors (02:39)
- OSPF v3 (02:42)
- Configuring OSPFv3 (02:38)
- Verfiy OSPFv3 (01:44)
- Verify OSPFv3 Continued (01:04)
- Summary (00:58)
- Summary (00:08)
Frame Relay and Serial Encapsulation
Establish WAN Connection Using Frame Relay (36:11)
- Introduction (00:14)
- What Is Frame Relay (01:18)
- What Is Frame Relay Continued (04:49)
- Topologies (01:34)
- Reachability Issues (03:12)
- Reachability Issues Continued (01:21)
- Frame Relay Signaling (01:48)
- Frame Relay Mapping (03:05)
- Frame Relay Mapping Continued (02:59)
- Manual Frame Relay Mapping (01:40)
- How to Configure Frame Relay (01:08)
- How to Configure Frame Relay Continued (00:42)
- Split Horizon (01:46)
- Configure Point-to=Point Frame Relay (03:43)
- Multipoint Frame Relay Configuration (02:44)
- How to Verify Frame Relay (01:03)
- How to Verify Frame Relay Continued (02:01)
- Summary (00:47)
- Summary (00:08)
Configuring Serial Encapsulation (34:37)
- Introduction (00:11)
- Configuring Serial Encapsulation (03:50)
- Configuring a Serial Interface (01:30)
- Configuring a Serial Interface Continued (01:56)
- HDLC Protocol (02:21)
- HDLC Protocol Continued (00:15)
- Other Point-to-Point Protocols (02:27)
- Configuring PPP (01:27)
- Configuring PPP Continued (00:24)
- PAP (01:33)
- CHAP (01:55)
- How to Configure CHAP (01:09)
- How to Configure CHAP Continued (01:27)
- Verify CHAP (00:38)
- Verify CHAP Continued (00:46)
- Troubleshooting Serial Interfaces (01:06)
- MLP (02:33)
- MLP Configuration (00:55)
- MLP Configuration Continued (01:29)
- PPPoE (02:37)
- PPPoE Client (00:53)
- PPPoE Client Continued (01:57)
- Verify PPPoE Client (00:25)
- Summary (00:33)
- Summary (00:08)
WAN Techologies
Understanding WAN Technologies (23:10)
- Introduction (00:54)
- What Is the WAN (01:13)
- What Is the WAN Continued (02:31)
- WAN Components (03:14)
- WAN Components Continued (03:03)
- WAN Serial Cabling (01:34)
- L2 WAN Protocols (03:54)
- Options for the WAN (02:44)
- Options for the WAN Continued (02:44)
- Summary (01:06)
- Summary (00:08)
VPN Solutions (14:31)
- Introduction (00:10)
- Benefits of Secure VPNs (03:43)
- Benefits of Secure VPNs Continued (02:12)
- Other Cisco SSL Solutions (04:23)
- Characteristics of IPSec (03:24)
- Summary (00:29)
- Summary (00:08)
WAN Demo (50:12)
- Introduction (00:06)
- Demo: Break Serial Link (04:21)
- Demo: Verifying Authentication (03:27)
- Demo: Frame Relay Connection (05:08)
- Demo: Frame Relay Mapping (05:53)
- Demo: Verifying Frame Relay (02:57)
- Demo: Configure Interface (05:51)
- Demo: Troubleshooting a Connection (06:34)
- Demo: Troubleshooting a Connection Continued (05:15)
- Demo: Topology Table (05:38)
- Demo: Advertising Routes (04:49)
- Summary (00:08)
Configure GRE Tunnels (39:58)
- Introduction (00:06)
- Demo: Default Tunneling (06:02)
- Demo: Ends of the Tunnel (05:17)
- Demo: Using a Tunnel (04:49)
- Demo: GRE Tunnel (01:45)
- GRE Tunnel (00:06)
- Demo: Home Network (03:55)
- Demo: Virtual Template (05:37)
- Demo: Pinging a Home Network (02:54)
- GRE Tunnel Overview (03:48)
- How to Configure the GRE (01:51)
- How to Configure the GRE (Cont.) (01:50)
- Verify the Tunnel (01:01)
- Summary (00:43)
- Summary (00:08)
Cisco Devices
Configure Device Support for Network Protocols (26:10)
- Introduction (00:12)
- Overview (02:01)
- SNMP Versions (02:08)
- Obtaining Data from an SNMP Agent (00:51)
- Obtaining Data from an SNMP Agent Continued (01:54)
- SNMP Configuration (03:42)
- Syslog Format (03:30)
- Syslog Configuration (00:48)
- NetFlow Overview (01:28)
- NetFlow Overview Continued (01:25)
- NetFlow Components (00:47)
- Flow (01:21)
- NetFlow Architecture (02:12)
- Demo: Configuring NetFlow (00:36)
- Configuring NetFlow Continued (02:19)
- Summary (00:41)
- Summary (00:08)
Managing Cisco Devices (41:41)
- Introduction (00:11)
- Internal Components of a Router (04:47)
- What does ROM Do (01:08)
- Router Bootup Sequence (01:35)
- Configuration Register (00:58)
- Changing the Configuration Register (01:25)
- How the IOS Is Found (02:24)
- IOS Loading (00:37)
- IOS Loading Continued (00:56)
- Loading the IOS Configuration File (00:54)
- Loading the IOS Configuration File Continued (00:40)
- Cisco IOS Integrated File System (01:59)
- Viewing the Integrated System (01:08)
- Managing IOS Images (00:56)
- Reading the IOS Filename (01:43)
- Backing up the Image (01:14)
- Backing up the Image Continued (01:52)
- Upgrading the IOS (01:14)
- Upgrading the IOS Continued (02:22)
- Copy Command Result (02:31)
- Managing Device Configuration Files (01:19)
- Managing Device Configuration Files Continued (01:52)
- Recovering the Enable Password/Secret (04:47)
- Recovering the Enable Password/Secret Continued (01:47)
- Summary (01:03)
- Summary (00:08)
Licensing and Superlab
Licensing Demo (49:28)
- Introduction (00:13)
- Demo: Router Logs (05:27)
- Demo: Severity Levels (03:41)
- Demo: Router Secrets (06:02)
- Demo: Changing a Router Secret (04:10)
- Demo: Remove Configurations (03:51)
- Licensing Intro (00:13)
- Demo: Basic Configuration (05:16)
- Demo: Create Sub-Interfaces (04:57)
- Demo: Trunking (07:48)
- Overview of Licensing (02:57)
- Overview of Licensing Continued (03:45)
- Verifying the Licenses (00:56)
- Summary (00:08)
Licensing and Superlab Demo Part 1 (52:11)
- Introduction (00:13)
- Installing a Permanent License (01:00)
- Installing an Evaluation License (02:09)
- Back up the License (00:51)
- Uninstalling the License (01:13)
- Password Recovery (01:58)
- Recovery (01:45)
- Config-Register (01:56)
- Config-Register Continued (05:32)
- Universal Images (01:14)
- Demo: Create Channel Groups (05:48)
- Demo: Channel Group Verifications (05:17)
- Demo: Multiple Hosts Per Port (03:58)
- Demo: DHCP Service (05:32)
- Demo: Prepare for IPv6 Addresses (04:33)
- Demo: Assign IPv6 Addresses (03:49)
- Demo: IPv6 Neighbors (05:07)
- Summary (00:08)
Superlab Demo Part 2 (43:16)
- Introduction (00:13)
- Demo: Configure Serial Links (05:31)
- Demo: Encapsulation (05:00)
- Demo: Frame Relay for Links (05:13)
- Demo: NAT (05:12)
- Demo: IP Translations (04:32)
- Demo: Routing Protocols (05:38)
- Demo: OSPF Interface (05:41)
- Demo: (06:03)
- Summary (00:08)
Superlab Demo Part 3 (33:54)
- Introduction (00:13)
- Demo: EIGRP (05:16)
- Demo: EIGRP Continued (04:48)
- Demo: IPv6 Neighbors (06:21)
- Demo: Control Server Access (04:41)
- Demo: Access List (05:41)
- Demo: Troubleshoot Access List (03:04)
- Demo: Per-VLAN Spanning Tree (03:38)
- Summary (00:08)